WiFi
Modem Installation Guide
A. PepLink
Surf200 BG Installation Guide
1. Connect the power cable and ethernet cable at the back of
PepLink Surf
2. Connect the other end of ethernet cable to the ethernet
port
at the back of your computer or laptop
3. Turn on your PepLink Surf
4. Turn on your computer
5. Open browser. The default page will be the advance
config
page (URL is http://192.168.20.1)
6. Change the SSID to GoogleWiFi , case sensitive.
7. Scroll down and click save.
8. Click reboot.
9. Click Connect (if brought back to config page -
click connect again)
10. When connected, close the browser.
11. Open up a new browser.
12. Login to Google WiFi
For
configuration of PepLink Surf200BG + AP, please download:
PepLink Surf200 BG + AP - How to setup Home AP (Access Point)
B. Ruckus
Wireless Metroflex Installation Guide
1. Connect the power cable and ethernet cable at
the back of Ruckus' Metroflex
2. Connect the other end of ethernet cable to the ethernet
port of your computer or laptop
3. Turn on your Ruckus Wireless Metroflex
4. Turn on your Computer
5. Open browser. The default page will be the administration
page.
The URL is http://192.168.1.1
6. Under Configuration, click
Wireless
7. Change the SSID to GoogleWiFi , case sensitive.
8. Scroll down and click next. Click next.
9. Click reboot.
10. Close current browser and open up a new browser.
11. Login to Google WiFi
For
complete set-up guide for Ruckus Wireless Metroflex Broadband Gateway, pls. download:
Ruckus Metroflex - User Guide
Frequently
Asked Questions (FAQs):